Walimex WT-3570 Basic Tripod (aluminium, 63-168 cm, 1495 g, incl. 3D panhead, quick-release plate and practical carrying bag) bronze

Versatile entry-level tripod with a large maximum working height

The walimex pro WT-3570 Basic tripod is a versatile and very
stable entry-level tripod for photo and video shoots. It offers a large
maximum working height of 168 cm and a 3D panhead as a tripod head. It offers many
practical features at an attractive price, very good stability and an enormous
maximum height of 168 cm. Despite its very solid construction and the extensive
features of this tripod, the Walimex pro WT-3570 weighs only 1,495 grams
including the tripod head. A transport and storage bag is already included in the scope of delivery and completes
the full range of features.

Large maximum working height and impressive stability

The tripod has an especially large maximum working height of 168 cm
including the tripod head and a minimum working height of 63 cm. The integrated
crank in the tripod shoulder allows you to adjust the height as you wish,
with millimetre precision, and to lock it reliably with a fixing screw.
The three aluminium tripod legs are anodised and very solidly constructed. They
are a maximum of 29 mm wide and have convenient lever quick-release fasteners
(flip-locks).



The mid-level spreader provides excellent stability and
allows for infinite adjustment of the leg angle. The large footprint of
maximum 1.05 m, in combination with the very generous dimensions
of all components, ensures impressive stability. You can add additional weight to the tripod using the load hook, thus ensuring excellent stability even in adverse conditions or when using very light equipment.



Rubber feet with levelling ensure a secure stand on any surface – whether in the studio or outdoors as a travel tripod.

Easy operation and full-fledged equipment
The
Walimex pro WT-3570 tripod allows quick and precise alignment thanks to a spirit level on the head and a level
on the tripod shoulder. A
handle on the tripod shoulder also ensures easy and convenient
handling of the tripod. The tripod and panhead can support up to 4 kg and
your equipment can be quickly and easily mounted using a quick-release plate with a 1/4
inch connection. The quick-release plate is extra large at 75 x 55 mm
and can be attached or detached in seconds thanks to the convenient locking lever.

Very useful in practice and certainly
not a matter of course with entry-level tripods – additional
quick-release plates for the WT-3570 can be purchased separately (walimex
no. 13824). A transport and storage bag is also included.

3D panhead with wide adjustment range
The built-in 3D video panhead allows you to pan your camera 360 degrees and tilt it 90 degrees for portrait format shots. The extremely wide tilt range of -100° to +100° (forward and back) also allows for very controlled and shake-free panning on the vertical plane. Individually lockable fixing screws secure your equipment in the desired
position.


The Walimex pro WT-3570 is therefore ideal for light to
medium DSLR cameras, mirrorless DSLM and system cameras,
digital cameras and action cams.

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions and property.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. The specified maximum load capacity is not applicable when the centre column is fully extended. When the centre column is fully extended this results in a reduced maximum load capacity and the tripod may not be as stable.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
  
• Moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• Tripod weight bags should only be used to secure your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  Please Follow the Following Safety Information When Using a Ball Head or Pan Tilt Head:
  
• When your camera equipment is screwed on, hold your device with one hand whilst unlocking the ball head or pan tilt head to prevent any possible damage to your camera equipment.
  
• Make sure that the quick-release plate is inserted correctly and not tilted. The locking knob needs to be in the furthest locking position to prevent your camera equipment from falling down.
  Using a Crank (Depends on Model)
  
• When using a crank, the locking screw on the centre column must always be loosened before adjusting the height of the centre column, otherwise you could damage the delicate pitch thread.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com