Walimex WT-3530 Basic Tripod (aluminium, 56-146 cm, 1070 g, incl. 3D panhead, quick-release plate and practical carrying bag) bronze

Versatile and compact entry-level tripod
The Walimex pro WT-3530 Basic tripod is a very lightweight and versatile entry-level tripod for photo and video shoots. It offers a maximum working height of 146cm and a 3D panhead as a tripod head. It offers many practical features and amazing stability at a very attractive price. The tripod is ideal for photo and film shoots with light to medium-weight cameras.

3D panhead with bubble level
The Walimex pro WT-3530 tripod is equipped with a 3D panhead that allows for precise alignment of the tripod using a bubble level on the head and a spirit level on the tripod shoulder. The panhead can take a load of up to 3 kg and your equipment can be quickly and easily mounted using a quick-release plate with a 1/4-inch connection. The quick-release plate is very generously sized at 65 x 52 mm and can be released or attached in seconds thanks to a practical locking lever. Very useful in practice and certainly not a matter of course with entry-level tripods – additional quick-release plates for the WT-3530 can be purchased separately (Walimex No. 1015129 (65mm) and 1013824 (75mm)).
The 3D video panhead offers you the option of panning your camera 360 degrees and tilting it 90° for portrait format shots. Even panning on the vertical plane is possible with a wide tilt range of -90° to +75° (forward and backward) in a very controlled and shake-free manner. Individually operable locking screws secure your equipment in the desired angle setting. The Walimex pro WT-3530 is therefore ideally suited for lighter SLR cameras, mirrorless DSLMs and system cameras or even digital cameras.

Large max. working height and amazing stability
Despite its solid construction and the many features of this entry-level tripod , the Walimex pro WT-3530 weighs only 1070 grams including the tripod head and offers a minimal pack size of 56cm.
The WT-3530 has a maximum working height of 146cm including the 3-way panhead (minimum working height 56cm). With the integrated crank in the tripod shoulder, you can adjust the height steplessly according to your requirements and lock it reliably with a fixing screw. The 3 aluminium tripod legs are anodised and very solidly designed. They are maximum 22mm wide and 17mm deep and have quick-release clamp fasteners. A mid-level spreader provides additional stability and allows for infinitely variable adjustment of the leg angle. Generously dimensioned rubber feet ensure a secure footing and a load hook provides additional support as an option. A carry handle on the tripod shoulder enables easy and convenient handling of the tripod.

Features:
• Extremely lightweight and versatile entry-level tripod
• Working height 56 to 146cm , max. load capacity 3kg
• Weight only 1070 grams incl. panhead
• 3D panhead incl. 65mm quick-release plate
• Handle, mid-level spreader and load hook
• Spirit level and bubble level

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions and property.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. The specified maximum load capacity is not applicable when the centre column is fully extended. When the centre column is fully extended this results in a reduced maximum load capacity and the tripod may not be as stable.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
  
• Moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• Tripod weight bags should only be used to secure your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  Please Follow the Following Safety Information When Using a Ball Head or Pan Tilt Head:
  
• When your camera equipment is screwed on, hold your device with one hand whilst unlocking the ball head or pan tilt head to prevent any possible damage to your camera equipment.
  
• Make sure that the quick-release plate is inserted correctly and not tilted. The locking knob needs to be in the furthest locking position to prevent your camera equipment from falling down.
  Using a Crank (Depends on Model)
  
• When using a crank, the locking screw on the centre column must always be loosened before adjusting the height of the centre column, otherwise you could damage the delicate pitch thread.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com