Walimex shooting table set Pro Daylight

More success with the right equipment! That is the idea behind this product photography set. With just a few basics, you can build a small, professional photo studio and present your products in a way that promotes sales and ensures high quality. The set includes a shooting table, three LED Bi-Colour 60 W lights with softboxes, a boom arm and three high-quality tripods. All products guarantee reliable technology and easy operation, and thus provide the ideal conditions for unique results.

The Basic L shooting table is perfect for quick and high-quality product or material shots. It is ideal for online retailers or private eBay sellers. The sturdy frame ensures maximum stability even with heavy objects. The table height of approx. 80 cm provides a comfortable shooting height.

The walimex pro LED Bi-Colour Light with softbox in 40x60cm is a powerful continuous light and the ideal helper for soft and even illumination. It helps you to work professionally and is perfectly suited when it comes to reflection-free illumination. The power and colour temperature (3,000-6,000K) can be conveniently controlled using the included remote control.

In combination with a tripod, the boom is a practical solution for setting highlights or for general illumination from above. Studio flashguns can be attached to the extension arm in two sections and extended to a length of 170cm, held in balance by the counterweight, which weighs approx. 2000g.

The tripods (1xWT-806 with max. 256cm and 2x WT-803 with max. 200cm) come with matching stabilisers for daylight and boom. Both tripods are very well made, are lightweight and, thanks to their transport size, can be used flexibly for a range of applications.

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
  Risk of Injury When Loosening Pretensioned Parts!
  The springs on centre column are pretensioned when they are delivered. WARNING! When opening the tripod locks, make sure to keep enough distance from the top end of the tripod and do not lean over the tripod.
  
• So that the tripod can be packaged and delivered, the fitted spring damps are pushed slightly together and then locked into place. When opening the locking clamps, the centre column parts can spring out up to 20 cm. This can damage your eyes and even cause blindness.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
  
• Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
• Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
  
• When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using your tripod at different heights. They offer added stability for your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  
  Important Information
  
• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries, damage to your possessions, property, and the environment.
  
• Carefully read through all the safety information detailed in the set of instructions. This safety information only refers to the LED softbox and the camera accessories used.
  
• Disposing of Cameras, Camera Equipment, and Accessories: Please dispose of the packaging and your device at the end of its lifespan in accordance with the laws applicable in your country of residence.
  
• Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets. Please dispose of the packaging and your device at the end of its lifespan in accordance with the laws applicable in your country of residence.
  Glare From LED Lights and Eye Damage
  
• If people or animals look directly into an LED light source, the optical radiation from LED light pockets can dazzle your eyes and result in afterimages. This may cause accidents or damage to your eyes.
  Preventing Burns and Injuries
  
• Be careful not to trap or injure yourself when using this device or other camera accessories, such as a tripod.
  
• Make sure that the device and other camera accessories are always set up properly so that they do not slip or fall over.
  
• Make sure that there are no loose screws.
  
• Do not cover the LED softbox and keep it away from flammable objects.
  Risk of Electric Shock and Fire Due to a Short Circuit
  A short circuit can be caused by defective cables and water damage.
  
• Only use the original cables that come with the device.
  
• Only use the device in dry rooms or outdoors under dry conditions.
  
• Never touch the lamp socket, not even with screwdrivers or any other types of tools.
  
• When the device is not in use, or it needs to be repaired, make sure to unplug it from the mains. The device will need to be unplugged from the main power supply.
  
• In case of any damage to your device, it is advised to have it checked by a qualified electrician before switching it back on.
  
• If your device is damaged, broken, or if you notice a burning smell:
  o Disconnect the device immediately by unplugging it and do not try to plug it back in.
  o Do not dismantle or try to repair the device.
  o Never try to repair the device yourself. If the device needs repairing, then this should only be done by a qualified electrician.
  Risk of Burns
  
• The light source can get as hot as 95 °C.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com