Skip to main content

Walimex pro WT-501 boom stand 175cm, adjustable light stand with 215 cm holding arm, 4.4 kg counterweight, 1/4 inch thread for softbox, studio light, reflector, flash, ideal for product photography

Product information "Walimex pro WT-501 boom stand 175cm, adjustable light stand with 215 cm holding arm, 4.4 kg counterweight, 1/4 inch thread for softbox, studio light, reflector, flash, ideal for product photography"

Stable boom stand with convincing price-performance ratio

With this boom stand, also known as a boom stand, including telescopic boom arm
from walimex,
you get an
extremely practical and stable boom stand. It offers
convincing stability even when mounting medium-weight equipment. The
maximum load of 5 to 3 kg (depending on the extension length) is achieved by the
stable telescopic tripod segments with diameters of 30 and 26 mm. The boom element
of the walimex WT-501 can be extended in length from 115 to 215 cm thanks to the 2 built-in segments.


The built-in mounting adapter provides convenient attachment of your equipment to the telescopic arm, because it can be easily removed from the holder and you can attach your equipment here using a 5/8 inch spigot (16 mm spigot) or a 1/4 inch thread.


The walimex pro WT-501 Boom Stand is a low-priced solution for setting highlights or for general illumination from above. It adds another dimension to the illumination range of your studio flashguns. Your equipment is kept in balance by a 4.4 kg counterweight.




Spring-loaded boom stand with variable angle adjustment and an extension height
of 100 to 410 cm

This boom stand can be adjusted in height from
ground level
to approx. 410 cm. Thanks to the variable angle adjustment of the telescopic arm, you can move your equipment in a matter of seconds, both close to the ground and above the heads of your models. The boom is attached to the supplied lamp tripod using a robust clamp mount. The boom mount is very solid and has two practical fastening levers. The holder allows the
connection of the boom to tripod tubes from 22 to 35 mm in diameter. The
holder allows the boom to be adjusted through 360 degrees, thus offering a simple and very
practical solution for your light placement. The spring damping of the centre column elements of the stand
makes work easier and prevents your built-in equipment from lowering too quickly and uncontrollably.



With these additional features, your photo and video equipment, such as studio flashguns, LED lights,
reflectors, backgrounds or softboxes, is held very securely and the light can be precisely aligned.
You can implement the desired lighting effects in a flash, whether
you want to create a light setting from below or directional light from above for hair and effect lighting.





Adjustable 4.4 kg counterweight
The telescopic boom has
an adjustable 4.4 kg metal weight that allows you to
always keep your equipment in the right balance and
adjust the counterweight to the set angle and the built-in equipment.






Features:

  • Boom stand for connecting photo and video equipment
  • Working height from ground level to 410 cm thanks to variable
    angle adjustment of the telescopic arm
  • Boom stand with a max. height of 100 cm (horizontal telescopic arm) to
    approx. 410 cm (extended stand and telescopic arm)
  • Stand can be extended from 100 to 200 cm, telescopic arm can be extended from 115 to 215 cm
  • High load capacity of the entire system from 5 kg to 3 kg thanks to the large
    tube diameter on the stand and telescopic
  • Solid boom mounts, 360-degree rotatable and height-adjustable
  • Mounting adapter
    with 5/8 inch spigot (16 mm pin) and 1/4 inch thread, easily removable





< strong>Ideal for:

  • Studio and system flashes
  • LED lights
  • Daylights, softboxes
  • Reflectors, umbrellas, backgrounds and much more
  • Hair, effect and backlighting, ideal for directional light from above


Manufacturer
  • manufacture location Walser GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@fotowalser.com
Properties "Walimex pro WT-501 boom stand 175cm, adjustable light stand with 215 cm holding arm, 4.4 kg counterweight, 1/4 inch thread for softbox, studio light, reflector, flash, ideal for product photography"
Anzahl Stativsegmente: 2
Ausziehbar: Yes
Battery included: No
Battery required: No
Colour: black
Dimensions: 1280 x 230 x 125 mm
Durchmesser 1. Stativsegment (v.u.): 35 Millimeter
Durchmesser 2. Stativsegment (v.u.): 30 Millimeter
Durchmesser Standfläche max.: 94 Zentimeter
Dämpfung verbaut: Yes
Gewicht Stativ: 1535 Gramm
Main material: metal
Material Verschlussklemmen: Metall
Max. Traglast Gesamtsystem: 5 Kilogramm
Max. Traglast Stativ: 6 Kilogramm
Minimales Packmaß: 120 Zentimeter
Mögliche Anschlüsse: 1/4 Zoll, 5/8 Spigot (16mm Zapfen)
Product type: Fotostativ
Transporttasche Stativ enthalten: No
Data according to manufacturer. Subject to alterations. Errors expected.