Walimex pro Wireless Trigger Set Operator USB Plus

Universally compatible

The 16-channel walimex pro Operater USB Plus remote trigger allows you to trigger your flash wirelessly over a distance of up to 50 metres. The receiver can simply be attached to the flash and triggered by hand or at the camera's flash shoe. The set is extremely flexible in use: it is compatible with the walimex pro light shooter, the walimex pro Delta Transceiver or also with any flash device that has a USB connection.

Versatile functions and settings

Thanks to numerous setting options, the set is much more than just a wireless flash trigger. 16 possible channels allow the triggering of several flashes, which can in turn be controlled with different outputs by dividing them into groups. For optimal power settings, each flash unit can be individually controlled or deactivated via the transmitter. Alternatively, the remote trigger can also be used purely as a remote control for the flash. The beep and the setting lamp or the AF focusing light beam can also be switched on or off as required. The power ratio of the flash can be displayed in two modes.

WARNING
Risk of Electric Shock, Fire Due a Short Circuit
Damaged cables and moisture or water can cause a short circuit. In the event of a short circuit, the conductors may heat up, causing some or all of their insulation to melt. This may cause a fire.
Avoid any sudden temperature changes. Condensation can occur when the device is exposed to sudden temperature changes, e.g. in winter, when you take a remote control from outside from a warm room. It is recommended to put the device in a bag or plastic bag beforehand.
Do not expose the device to water and moisture. The device is not waterproof. If it is immersed in water or exposed to high humidity, it may stop working, rust, and corrode, or even cause irreparable damage.
Never operate the device with wet hands or feet.
Only use the device indoors and in a dry room.
Never use the device outside.
Make sure that the cables and conductors cannot become damaged. Exposure to heat, chemicals, or mechanical stress such as friction, bending, tearing, being squashed or nibbled on by animals can cause damage to the cables and conductors.
Make sure that the device does not tip or fall over. In case of any damage to your device, it is advised to have it checked by a qualified electrician before switching it back on.
If your device is damaged, broken, or if you notice a burning smell:
Never use the device if it has damaged cables. Do not dismantle or try to repair the device. Never try to repair the device yourself. If the device needs repairing, then this should only be done by a qualified electrician.
When cleaning and maintaining the device, always follow the instructions in the user manual.

CAUTION
Protect the device from strong magnetic fields. The strong static or magnetic field generated by devices such as radio transmitters can damage your device.

Important Information About Batteries/Rechargeable Batteries
These can leak or explode if they are not handled with care. Follow the following safety instructions for batteries and rechargeable batteries:

• Only use batteries or rechargeable batteries that are specified in the manual. Do not use old and new batteries or different types of batteries at the same time.
  
• Do not throw batteries or rechargeable batteries into a fire or expose them to direct heat.
  
• Do not try to insert batteries the wrong way round.
  
• Batteries tend to leak after a complete discharge. To prevent any damage to the product, make sure to remove the batteries or rechargeable batteries if you are not going to use the product for an extended period of time or if the rechargeable battery is discharged.
  
• If the batteries or rechargeable battery leak and the liquid comes into contact with your skin or clothing, rinse immediately with water.