Walimex pro Wind Machine 500

With the walimexpro wind machine, you can add movement to your images and work professionally. Whether it's blowing hair or clothes, it's hard to imagine people and beauty photography without it. The wind machine can be used in a variety of ways thanks to the continuously adjustable strength of the blower – from a summer breeze to a storm – and it transforms your photo studio into a beach or mountain peak in no time at all. The sturdy bracket makes it easy to lock and tilt the metal machine. The tunnel shape concentrates the airflow, which is not possible with a conventional fan.

Important Information

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using this product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries, damage to your possessions, property, and the environment.
  
• Carefully read through all the safety information detailed in the set of instructions.
  
• Disposing of Cameras, Camera Equipment, and Accessories: Please dispose of the packaging and your device at the end of its lifespan in accordance with the laws applicable in your country of residence.
  
• Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
  Risk of Personal Injury
  Clothing or hair can get caught in the device, which can lead to serious head injuries.
  
• When setting up your device make sure to leave a safe distance of at least 1.5 metres between the device and your subject.
  
• Make sure that your hair does not come into contact with the device.
  
• Keep the device out of reach from children and animals.
  Risk of Hand and Finger Injuries
  Never put your hands, fingers, objects or items of clothing through the safety grille. This can cause serious injuries to your fingers and hands.
  
• Keep the device out of reach from children and animals.
  Risk of injury and fire hazard if device falls or tips over.
  The device weighs approx. 10.7 kg.
  
• Ensure that your device is always carefully assembled so that it does not fall over and make sure that it is stored safely.
  
• Keep the device out of reach from children and animals. They could knock over the device.
  
• The cables can be a trip hazard, therefore, make sure that are clearly visible to avoid accidents. This could cause the device to fall or tip over.
  
• Do not exceed the tripod’s maximum load capacity.
  Risk of Fire and an Electric Shock Due to a Short Circuit
  A short circuit can be caused by defective cables and water damage. In the event of a short circuit, the conductor cables can become too hot, and as a result their insulation will melt, or the cables will melt. This may cause a fire.
  
• Only use the original cables that come with the device.
  
• Do not touch the device with wet or damp hands or feet.
  
• Only use the device indoors and in a dry room.
  
• Only clean your device as specified in the set of instructions.
  
• Ensure that any cables and wires are not damaged.
  
• Make sure that the device does not tip or fall over. In case of any damage to your device, it is advised to have it checked by a qualified electrician before switching it back on.
  
• If your device is damaged, broken, or if you notice a burning smell:
  Disconnect the device from the main power supply by unplugging it. Do not use your device if it has damaged cables or if the housing is damaged. Do not dismantle or try to repair the device. Never try to repair the device yourself. If the device needs repairing, then this should only be done by a qualified electrician.
  
• Always maintain the device in accordance with these safety instructions.
  
• Only use spare parts for this device that comply with the product’s specifications.
  Risk of Electric Shock and Burns
  When the device is switched off, it is still connected to the mains. By unplugging your device, you can disconnect it from the main power supply.
  
• Switch off the device when it is not in use.
  
• Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
  
• Make sure that the device is switched off and cannot be switched back on by accident.
  
• During longer breaks, disconnect the device from the main power supply by removing the plug.
  Fire Hazard Due to Overheating
  Your device may overheat if the ventilation slots are covered. Objects and highly flammable materials may start to burn if they get too close to the device.
  
• Do not cover the device when it is on.
  
• Only use spare parts for this device that comply with the product’s specifications.
  
• Keep any easily flammable materials away from the device.
  
• If possible, remove all light materials and objects. Never spray anything into or onto the device such as gas, smoke, mist, water, or anything flammable.
  
• Do not use the device near open flames and do not smoke whilst it is operating.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com