€29.49
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Wireless flash trigger for up to 30 m away
• Compatible with Walimex pro Studio Flashes
• 16 channels and 4 groups
• Only weighs 25 g
• Control flashes and modelling lights
Product information "Walimex pro VE & VC & Newcomer Studio Flash Trigger - Wireless Remote Control with Up to 30 m Range, Flash Trigger with 16 Channels, 4 Groups, 1/160 Sec. Synchronisation - Perfect for Fast Movements"
Wireless Flash Trigger for Studio Flashes
Flash trigger for Walimex pro VE, VC and Newcomer Series
This flash trigger is compatible with the studio flashes from the Walimex pro VE, VC or Newcomer series. You can fire the trigger from up to 30 metres away thanks to the 2.4 GHz. This flash trigger is wireless, and this makes it perfect for indoor and outdoor photoshoots. You can divide your studio flashes into four different groups. In addition, it features 16 flash channels, and this allows you to control different studio flashes and modelling lights simultaneously.
Wireless Remote Control for Studio Flashes
The flash trigger only weighs 25 grams, and it can be attached to the camera's hot shoe and trigger via the centre contact. Synchronisation times of up to 1/160 second are possible, which enables you to capture fast movements. The trigger allows you to adjust all settings, such as the modelling light or flash output. This makes the flash trigger practical for studio flashes that are hard to reach or when using ceiling rail systems.
What’s Included:
- x1 Walimex pro VE & VC Excellence, Newcomer Studio Flash Trigger
- x1 CR2032 3 V battery
WARNING
Risk of Electric Shock, Fire Due a Short Circuit
Damaged cables and moisture or water can cause a short circuit. In the event of a short circuit, the conductors may heat up, causing some or all of their insulation to melt. This may cause a fire.
Avoid any sudden temperature changes. Condensation can occur when the device is exposed to sudden temperature changes, e.g. in winter, when you take a remote control from outside from a warm room. It is recommended to put the device in a bag or plastic bag beforehand.
Do not expose the device to water and moisture. The device is not waterproof. If it is immersed in water or exposed to high humidity, it may stop working, rust, and corrode, or even cause irreparable damage.
Never operate the device with wet hands or feet.
Only use the device indoors and in a dry room.
Never use the device outside.
Make sure that the cables and conductors cannot become damaged. Exposure to heat, chemicals, or mechanical stress such as friction, bending, tearing, being squashed or nibbled on by animals can cause damage to the cables and conductors.
Make sure that the device does not tip or fall over. In case of any damage to your device, it is advised to have it checked by a qualified electrician before switching it back on.
If your device is damaged, broken, or if you notice a burning smell:
Never use the device if it has damaged cables. Do not dismantle or try to repair the device. Never try to repair the device yourself. If the device needs repairing, then this should only be done by a qualified electrician.
When cleaning and maintaining the device, always follow the instructions in the user manual.
CAUTION
Protect the device from strong magnetic fields. The strong static or magnetic field generated by devices such as radio transmitters can damage your device.
Important Information About Batteries/Rechargeable Batteries
These can leak or explode if they are not handled with care. Follow the following safety instructions for batteries and rechargeable batteries:
Only use batteries or rechargeable batteries that are specified in the manual. Do not use old and new batteries or different types of batteries at the same time.
Do not throw batteries or rechargeable batteries into a fire or expose them to direct heat.
Do not try to insert batteries the wrong way round.
Batteries tend to leak after a complete discharge. To prevent any damage to the product, make sure to remove the batteries or rechargeable batteries if you are not going to use the product for an extended period of time or if the rechargeable battery is discharged.
If the batteries or rechargeable battery leak and the liquid comes into contact with your skin or clothing, rinse immediately with water.
Walser GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@fotowalser.com
Elektro- und Elektronikgeräte dürfen nicht über den Hausmüll entsorgt werden. Weitere Informationen zur Rückgabe und Entsorgung von Altgeräten finden Sie in unseren .
| Battery included: | Yes |
|---|---|
| Battery required: | Yes |
| Battery type: | CR 2032 |
| Colour: | black |
| Dimensions: | 60 x 40 x 30 mm |
| Main material: | plastic, metal |
| Product type: | camera trigger |
| Suitable for: | Walimex pro Campaigner Serie, Walimex pro Emerger Serie, Walimex pro Newcomer Serie, Walimex pro VC Excellence Serie, Walimex pro VE Excellence Serie |

















