Skip to main content Skip to search Skip to main navigation

Walimex pro sandbag

Product information "Walimex pro sandbag"

Keep your balance! Especially at outdoor shootings, where the wind can sometimes put a spoke in your wheel, a proper stabilisation of the equipment is the be-all and end-all. You can easily prevent unwanted tilting by using the walimex pro sandbag. This can be flexibly filled according to your requirements due to its two chambers. Whether you use sand or gravel, the sturdy material and patented zips ensure that the contents are always well secured. Each chamber holds approx. 2 litres, so that when fully loaded you have a wonderful counterweight. The stabilising bag can be easily attached to e.g. tripods or boom stands.

Manufacturer
  • manufacture location Walser GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@fotowalser.com
Properties "Walimex pro sandbag"
Battery included: No
Battery required: No
Colour: black
Dimensions: 520 x 50 x 250 mm
Kompatible Geräte: Lampenstative, Studiostative
Main material: polyester
Product type: weight
Data according to manufacturer. Subject to alterations. Errors expected.
Skip product gallery

Zubehör

Walimex weight for rods & boom stands, 4.4kg
Walimex weight for rods & boom stands, 4.4kg

Available

Item no.: 1013739
• suitable as a counterweight for boom stands (e.g. WT-501) or as a weight for lamp tripods
• also suitable for rods with a diameter of 3.5 cm
• weighs approx. 4.4kg

€37.37 *
Walimex pro tripod weight, 3kg
Walimex pro tripod weight, 3kg

Available

Item no.: 1015876
• Weighting for lamp tripods
• Weight 3kg
• For a secure stand
• Practical addition

From €18.20 *
Skip product gallery

könnte Sie auch interessieren

Walimex pro Light Stand WT-806 Height Adjustable up to 256 cm, Spring-Loaded Design, Includes 3/8" Adapter & Bag, Load Capacity 6 kg, Tripod Light Stand for Ring Lights, Reflectors & Flash Heads
Walimex pro Light Stand WT-806 Height Adjustable up to 256 cm, Spring-Loaded Design, Includes 3/8" Adapter & Bag, Load Capacity 6 kg, Tripod Light Stand for Ring Lights, Reflectors & Flash Heads

Available

Item no.: 1012138
• Light stand for indoor and outdoor use
• Working height 102 cm - 256 cm
• Maximum load capacity 6 kg
• Spring-loaded design
• Standard 5/8′′ spigot with a 1/4′′ thread

€34.72 *
Walimex pro AIR Jumbo 730 Light Stand Max height 730 cm, Load Capacity 22.5 kg, Light Stand with Air Cushioning, Lightweight Aluminium Design, Tripod for Photo Studios, Film Sets and Outdoor Use
Walimex pro AIR Jumbo 730 Light Stand Max height 730 cm, Load Capacity 22.5 kg, Light Stand with Air Cushioning, Lightweight Aluminium Design, Tripod for Photo Studios, Film Sets and Outdoor Use

Available

Item no.: 1016331
• Light stand for indoor and outdoor use
• Flexible working height from 162 - 730 cm
• Maximum load capacity 22.5 kg
• Air cushioned light stand
• 5/8” spigot with a 1/4” thread

From €209.00 *
Walimex pro 5-in-1 Foldable Reflector Set wavy, Ø107cm
Walimex pro 5-in-1 Foldable Reflector Set wavy, Ø107cm

Available

Item no.: 1017682
• Folding reflector Ø 107 cm with various covers for a wide range of lighting effects
• The base reflector with strong spring ring is covered with diffuser fabric
• Interchangeable cover has 4 different coatings:
• Wavy gold for fine, warm light characteristics, similar to sunlight, silver for hard and cool light characteristics
• White for soft and colour-neutral light characteristics, black for darkening, suitable for all areas of photography and film

€22.99 *
Walimex pro Umbrella Holder incl. Spigot Mount
Walimex pro Umbrella Holder incl. Spigot Mount

Available in 43 days

Item no.: 1021636
• Large umbrella holder with tilt function
• Spigot mount on both sides
• Umbrella holder with locking screw
• Handy adjusting lever with latching function, gradually adjustable in inclination
• 2-part spigot adapter with 1/4 inch and 3/8 inch spigot

From €18.52 *