Walimex pro replacement flash tube Newcomer 300/VT 300

walimex pro replacement flash tube for the Newcomer 300 and VT-300, . Power input 300 WS with a colour temperature of approx. 5600 K.

Note:
Our products have been specifically developed for photographic and video requirements during image recording and are not suitable for household lighting purposes.

Important Information

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through all the safety information detailed in the set of instructions. This safety information only refers to this product and any applicable camera accessories.
  
• Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
  Risk of Personal Injury Due to a Broken or Burst Flash Tube
  Even a small amount of skin grease residue on the flash tube can cause it to burst due to the heat that is generated when it is on. Glass splinters can cause injuries to your eyes and skin.
  
• Be careful when using a flash tube and ensure that the glass does not break.
  
• Do not touch the flash tube with your bare hands. Wear clean cotton gloves or use a clean cloth to touch it.
  
• Take care not to accidentally touch the flash tube when fitting or replacing any camera accessories.
  
  Flash Tube Wire (depending on model)
  If the wire for keeping it in place is not needed, you can wrap it carefully around the flash tube using cloth gloves.