Walimex pro Replacement Flash Tube for VC-400/600 Typ 2 Studio Units, Power Consumption 600 W, Colour Temperature 5400–5800 K, Replacement Flash Easy to Change
€62.72
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Plug-in flash tube, easy to change
• Power consumption: 600Ws
• Service life: approx. 10,000 flashes
• Colour temperature: 5400 - 5800K
• Compatible with the following studio flash units: Walimex pro VC-Excellence 400/500/600, Walimex pro VE-Excellence 400, Walimex pro VE-400, Walimex pro VC-400/600 from serial number 0903CH116305
Product information "Walimex pro Replacement Flash Tube for VC-400/600 Typ 2 Studio Units, Power Consumption 600 W, Colour Temperature 5400–5800 K, Replacement Flash Easy to Change"
Replacement Flash Tube for Walimex pro Studio Flashes
When a flash tube needs replacing, a compatible spare helps get your studio setup ready for use again quickly. The Walimex pro replacement flash tube features a practical plug-in design and a power consumption of 600 W. It is specifically intended for the VC-400/600 Typ 2 studio flash models.
Compatible with VC-400/600 Typ 2
The flash tube is designed for the Walimex pro VC-400/600 Typ 2 models. It is suitable for compatible studio flash setups used for portrait, fashion and product photography and can also be combined with softboxes and other light modifiers.
Daylight-Like Colour Temperature of 5400–5800 K
With a colour temperature of 5400–5800 K, the replacement tube produces daylight-like flash light and supports natural colour reproduction. Its consistent light characteristics make it suitable for different photographic applications and longer studio sessions.
Designed for Approx. 10,000 Flashes
The replacement flash tube is designed for a service life of approximately 10,000 flashes. This makes it suitable for regular studio work and repeated shooting sessions, providing a practical spare component for compatible Walimex pro studio flash equipment.
Plug-In Design for Easy Replacement
The plug-in construction makes the flash tube straightforward to replace when required, helping minimise interruptions during photography sessions. It is designed for photographic and video applications and is not intended for general household lighting.
Important Information
-
Download the full set of the instructions before setting up and using your device.
-
Carefully read through all the safety information detailed in the set of instructions. This safety information only refers to this product and any applicable camera accessories.
-
Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
Risk of Personal Injury Due to a Broken or Burst Flash Tube
Even a small amount of skin grease residue on the flash tube can cause it to burst due to the heat that is generated when it is on. Glass splinters can cause injuries to your eyes and skin.
-
Be careful when using a flash tube and ensure that the glass does not break.
-
Do not touch the flash tube with your bare hands. Wear clean cotton gloves or use a clean cloth to touch it.
-
Take care not to accidentally touch the flash tube when fitting or replacing any camera accessories.
Flash Tube Wire (depending on model)
If the wire for keeping it in place is not needed, you can wrap it carefully around the flash tube using cloth gloves.
-
Walser GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
-
service@fotowalser.com
Elektro- und Elektronikgeräte dürfen nicht über den Hausmüll entsorgt werden. Weitere Informationen zur Rückgabe und Entsorgung von Altgeräten finden Sie in unseren .
| Battery included: | No |
|---|---|
| Battery required: | No |
| Colour: | white |
| Colour temperature (in Kelvin): | 5400-5800 |
| Dimensions: | 70 x 68 x 68 mm |
| Illuminant type: | flash tubes |
| Main material: | glass |
| Product type: | studio flash lighting |
Zubehör
Available
• Luminous flux: 1200lm
• Power consumption: 150W
• Service life: approx. 1000h
• Socket: E27
Available
• Power consumption: 250 W
• Service life: approx. 1000h
• Base: E27
könnte Sie auch interessieren
Available
• Built-in 2.4 GHz receiver
• Flash output 100 W/s
• 5 W LED modelling light
• With overheating protection
Available
• Luminous flux: 1200lm
• Power consumption: 150W
• Service life: approx. 1000h
• Socket: E27
Available
• For VC-200/300 Typ 2
• 300 W power consumption
• 5400–5800 K colour temperature
• Service life of approx. 10,000 flashes
Available
• For Mover 200 TTL
• 200 W power consumption
• 5400–5800 K colour temperature
• Service life of approx. 10,000 flashes
Available
• FLEXIBLE SYSTEM FOR SHORT AND LONG RAILS & ROLLS - Large variable width 120 to 307 cm for your photo background thanks to the quick and easy extendable crossbar
• QUICKLY ARRANGE LARGE SUBJECTS AND GROUPS - Exceptional working height 102 to 256 cm for large subjects thanks to easily adjustable tripods
• ALWAYS AT HAND - Compactly foldable and stowable in its own carrying bag
• SCOPE OF DELIVERY - 2x WT-806 lamp tripod, 1x extendable crossbar, 1x carrying bag
Available
• Compatible with Walimex pro Studio Flashes
• 16 channels and 4 groups
• Only weighs 25 g
• Control flashes and modelling lights
Available
• Power consumption: 250 W
• Service life: approx. 1000h
• Base: E27