Walimex pro Replacement Flash Tube for Newcomer 300/VT-300 Studio Units, Power Consumption 300 W, Colour Temperature 5400–5800 K, Replacement Flash Easy to Change
€34.49
only 7 available.
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Replacement tube for studio flash units
• For Newcomer 300/VT-300
• 300 W power consumption
• 5400–5800 K colour temperature
• Service life of approx. 10,000 flashes
Product information "Walimex pro Replacement Flash Tube for Newcomer 300/VT-300 Studio Units, Power Consumption 300 W, Colour Temperature 5400–5800 K, Replacement Flash Easy to Change"
Replacement Flash Tube for Walimex pro Studio Flashes
When a flash tube needs replacing, a compatible spare helps get your studio setup ready for use again quickly. The Walimex pro replacement flash tube features a practical plug-in design and a power consumption of 300 W. It is specifically intended for the Newcomer 300/VT-300 studio flash models.
Compatible with Newcomer 300/VT-300
The flash tube is designed for the Walimex pro Newcomer 300/VT-300 models. It is suitable for compatible studio flash setups used for portrait, fashion and product photography and can also be combined with softboxes and other light modifiers.
Daylight-Like Colour Temperature of 5400–5800 K
With a colour temperature of 5400–5800 K, the replacement tube produces daylight-like flash light and supports natural colour reproduction. Its consistent light characteristics make it suitable for different photographic applications and longer studio sessions.
Designed for Approx. 10,000 Flashes
The replacement flash tube is designed for a service life of approximately 10,000 flashes. This makes it suitable for regular studio work and repeated shooting sessions, providing a practical spare component for compatible Walimex pro studio flash equipment.
Plug-In Design for Easy Replacement
The plug-in construction makes the flash tube straightforward to replace when required, helping minimise interruptions during photography sessions. It is designed for photographic and video applications and is not intended for general household lighting.
Important Information
-
Download the full set of the instructions before setting up and using your device.
-
Carefully read through all the safety information detailed in the set of instructions. This safety information only refers to this product and any applicable camera accessories.
-
Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
Risk of Personal Injury Due to a Broken or Burst Flash Tube
Even a small amount of skin grease residue on the flash tube can cause it to burst due to the heat that is generated when it is on. Glass splinters can cause injuries to your eyes and skin.
-
Be careful when using a flash tube and ensure that the glass does not break.
-
Do not touch the flash tube with your bare hands. Wear clean cotton gloves or use a clean cloth to touch it.
-
Take care not to accidentally touch the flash tube when fitting or replacing any camera accessories.
Flash Tube Wire (depending on model)
If the wire for keeping it in place is not needed, you can wrap it carefully around the flash tube using cloth gloves.
-
Walser GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
-
service@fotowalser.com
Elektro- und Elektronikgeräte dürfen nicht über den Hausmüll entsorgt werden. Weitere Informationen zur Rückgabe und Entsorgung von Altgeräten finden Sie in unseren .
| Battery included: | No |
|---|---|
| Battery required: | No |
| Colour: | white |
| Colour temperature (in Kelvin): | 5400-5800 |
| Dimensions: | 48 x 48 x 52 mm |
| Illuminant type: | flash tubes |
| Main material: | glass |
| Product type: | studio flash lighting |
könnte Sie auch interessieren
Available
• Built-in 2.4 GHz receiver
• Flash output 300 W/s
• 5 W LED modelling light
• With overheating protection
Available
• Base: G9
• Luminous flux: 900 lm
• Power consumption: 75 W
• Service life: approx. 1,500 h