€101.72
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Professional DSLR monitor (LED panel) for LiveView with 4x zoom
• With sun visor for excellent view of the display even in direct sunlight
• 16:9 aspect ratio, 1024x600, 17.8 cm (7 inch) display diagonal
• Contrast 800:1
• Please note: You will need a separate charger to charge the battery
Product information "Walimex pro Pro 17.8 cm (7 inch) LCD Monitor Director (HDMI) black 18683"
Perfect image control for professional results
The LCD monitor by walimex pro makes it easier for you to check images when filming with your DSLR or video camera and thus enables professional results. An optionally mountable lens hood, the high brightness and the high contrast ensure an excellent view on the display even in direct sunlight. With a display diagonal of 17.8cm (7 inches) and a resolution of max. 1024x600 pixels, the monitor shows a clear and detailed image. It supports the Full HD signal. The large viewing angle also allows several people to view the monitor.
Extensive functions with freely assignable function keys
The monitor is equipped with numerous functions that make it ideal for professional photography and filming. The peaking function marks all sharp edges in red, making it easier to control sharpness . The 1:1 pixel mapping function allows you to change the monitor resolution to the resolution of the camera, so that the view is displayed true to the camera . The false colour function is used to control the exposure. Areas of different brightness are displayed in different colours, allowing you to quickly identify underexposed and overexposed areas. The exposure function marks the overexposed image areas and thus also serves as an exposure control. 5D II mode allows you to switch to output resolution in the recording mode of EOS cameras, avoiding any interruption when starting to record video. The Check Field function reduces the display to monochromatic or to the red, green or blue channel. Freeze Input allows for precise observation in a still image. Aspect Ratio allows you to switch the image format between 16:9, 4:3 and full screen. In addition, the following functions are available: centre marker (crosshairs), underscan, H/V delay, colour bar, screen marker, zoom (4x), exposure and histogram. The device has four function buttons that you can freely assign according to your needs.
Including battery for use on location
The matching battery for operating the monitor is included. This means you can start immediately and are not dependent on an external power supply. This enables you to work on location and makes you more mobile and flexible in your work.
Tip: Order the matching charger for charging the battery (not included) right away. You can find it listed in the accessories.
Important Information
Download the full set of the instructions before setting up and using your device.
Carefully read through the full set of instructions before using this product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries, damage to your possessions, property, and the environment.
Carefully read through all the safety information detailed in the set of instructions.
Disposal of Cameras, Equipment, and Accessories: Please dispose of the packaging and your device at the end of its lifespan in accordance with laws applicable in your country of residence.
Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
Do not place the device with the display facing downwards.
Only connect the device to an earthed socket.
Risk of Fire and an Electric Shock Due to a Short Circuit
A short circuit can be caused by defective cables and water damage. In the event of a short circuit, the conductor cables can become too hot, and as a result their insulation will melt, or the cables will melt. This may cause a fire.
Only use the original cables that come with the device.
Do not touch the device with wet or damp hands or feet.
Only use the device indoors and in a dry room.
Only clean your device as specified in the set of instructions.
Ensure that any cables and wires are not damaged.
Make sure that the device does not fall or tip over. In case of any damage to your device, it is advised to have it checked by a qualified electrician before switching it back on.
If your device is damaged, broken, or if you notice a burning smell:
Disconnect the device from the main power supply by unplugging it. Do not use your device if it has damaged cables or if the housing is damaged. Do not dismantle or try to repair the device. Never try to repair the device yourself. If the device needs repairing, then this should only be done by a qualified electrician.
Always maintain the device in accordance with these safety instructions.
Only use spare parts for this device that comply with the product’s specifications.
Risk of Electric Shock and Burns
When the device is switched off, it is still connected to the mains. By unplugging your device, you can disconnect it from the main power supply.
Turn off the device when it is not in use.
Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
Make sure that the device cannot be turned back on by accident.
During longer breaks, disconnect the device from the main power supply by removing the plug.
Fire Hazard Due to Overheating
Your device may overheat if the ventilation slots are covered. Objects and highly flammable materials may start to burn if they get too close to the device.
Do not cover the device when it is on.
Only use spare parts for this device that comply with the product’s specifications.
Keep any easily flammable materials away from your device.
Important Information About Batteries/Rechargeable Batteries
These can leak or explode if they are not handled with care. Follow the following safety instructions for batteries and rechargeable batteries:
Only use batteries or rechargeable batteries that are specified in these safety instructions.
Do not throw batteries or rechargeable batteries into a fire or expose them to direct heat.
To prevent any damage to the product, make sure to remove the batteries or rechargeable batteries if you are not going to use the product for an extended period of time or if the rechargeable battery is discharged.
If the batteries or rechargeable battery leak and the liquid comes into contact with your skin or clothing, rinse immediately with water.
Do not leave any batteries on charge unattended.
Once the device is fully charged, disconnect it from the power supply.
Walser GmbH
- Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@fotowalser.com
| 1/4" accessory thread: | Yes |
|---|---|
| Battery included: | Yes |
| Battery mounts on the device: | 1x NP-F |
| Battery required: | No |
| Battery type: | Lithium-ion battery |
| Colour: | black |
| Compatible battery models: | NP-F |
| Dimensions: | 50 x 200 x 141 mm |
| Display type: | IPS LCD |
| Main material: | plastic |
| Number of batteries included: | 1 piece |
| Product type: | monitor |
| Protective housing material: | plastic |












