Walimex pro Light Stand WT-806 Height Adjustable up to 256 cm, Spring-Loaded Design, Includes 3/8" Adapter & Bag, Load Capacity 6 kg, Tripod Light Stand for Ring Lights, Reflectors & Flash Heads
Item no.: 1012138
GTIN/EAN: 4250234521383
€32.86 -16%
previously €38.99 Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Light stand for indoor and outdoor use
• Working height 102 cm - 256 cm
• Maximum load capacity 6 kg
• Spring-loaded design
• Standard 5/8′′ spigot with a 1/4′′ thread
Product information "Walimex pro Light Stand WT-806 Height Adjustable up to 256 cm, Spring-Loaded Design, Includes 3/8" Adapter & Bag, Load Capacity 6 kg, Tripod Light Stand for Ring Lights, Reflectors & Flash Heads"
Perfect for Indoor and Outdoor Photoshoots
The Walimex pro WT-806 Light Stand is height adjustable up to 256 cm. It supports a wide range of lighting, such as flash heads, reflectors and other pieces of photography equipment. You can use this tripod light stand both in photo studios and outdoors. It is very easy to assemble and adjust the height. The load capacity of 6 kg allows you to use larger, heavier pieces of photography equipment.
Flexible Lighting Stand
The light stand is very sturdy, even when the centre column is fully extended. It weighs only 1.85 kg and when folded it is 98 cm, which makes it easy to carry and store. The centre column has a spring-loaded design, which ensures that you can safely adjust the height of your light stand.
Compatible with a Wide Range of Photography Accessories
The 5/8′′ spigot (16 mm spigot) on the top of the light stand is compatible with a wide range of photography equipment and accessories. There is a 1/4′′ thread and this allows you to attach various pieces of photography equipment. A 3/8′′ thread can also be used with the included adapter.
High-Quality Design for Long-Lasting Use
Thanks to the adjustable metal fasteners and the robust design, the light stand is designed for long-lasting use. This lighting stand is an indispensable accessory for any professional photographer or videographer. It also supports studio flash heads, softboxes, reflectors and other pieces of photography equipment.
What’s Included:
- x1 Walimex pro WT-806 Light Stand
- x1 1/4′′ to 3/8′′ adapter
- x1 light stand bag
The Walimex pro WT-806 Light Stand is height adjustable up to 256 cm. It supports a wide range of lighting, such as flash heads, reflectors and other pieces of photography equipment. You can use this tripod light stand both in photo studios and outdoors. It is very easy to assemble and adjust the height. The load capacity of 6 kg allows you to use larger, heavier pieces of photography equipment.
Flexible Lighting Stand
The light stand is very sturdy, even when the centre column is fully extended. It weighs only 1.85 kg and when folded it is 98 cm, which makes it easy to carry and store. The centre column has a spring-loaded design, which ensures that you can safely adjust the height of your light stand.
Compatible with a Wide Range of Photography Accessories
The 5/8′′ spigot (16 mm spigot) on the top of the light stand is compatible with a wide range of photography equipment and accessories. There is a 1/4′′ thread and this allows you to attach various pieces of photography equipment. A 3/8′′ thread can also be used with the included adapter.
High-Quality Design for Long-Lasting Use
Thanks to the adjustable metal fasteners and the robust design, the light stand is designed for long-lasting use. This lighting stand is an indispensable accessory for any professional photographer or videographer. It also supports studio flash heads, softboxes, reflectors and other pieces of photography equipment.
What’s Included:
- x1 Walimex pro WT-806 Light Stand
- x1 1/4′′ to 3/8′′ adapter
- x1 light stand bag
Safety Instructions
Download the full set of the instructions before setting up and using your device.
- Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
Risk of Injury When Loosening Pretensioned Parts!
The springs on centre column are pretensioned when they are delivered. WARNING! When opening the tripod locks, make sure to keep enough distance from the top end of the tripod and do not lean over the tripod.
- So that the tripod can be packaged and delivered, the fitted spring damps are pushed slightly together and then locked into place. When opening the locking clamps, the centre column parts can spring out up to 20 cm. This may cause injuries.
Risk of Injury Due to Improper Use
- Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
- Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
- Please follow the safety information in the manual regarding the maximum load capacity for your tripod.
- Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
- Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
- After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
- When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
- Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
- When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using a tripod at different heights. They offer added stability for your tripod.
- Using tripod castors:
Always lock the castors into place when you are not moving your tripod.
Manufacturer
Walser GmbH - Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@fotowalser.com
Properties "Walimex pro Light Stand WT-806 Height Adjustable up to 256 cm, Spring-Loaded Design, Includes 3/8" Adapter & Bag, Load Capacity 6 kg, Tripod Light Stand for Ring Lights, Reflectors & Flash Heads"
| Anzahl Stativsegmente: | 3 |
|---|---|
| Ausziehbar: | Yes |
| Battery included: | No |
| Battery required: | No |
| Colour: | black |
| Dimensions: | 980 x 80 x 80 mm |
| Durchmesser 1. Stativsegment (v.u.): | 35 Millimeter |
| Durchmesser 2. Stativsegment (v.u.): | 30 Millimeter |
| Durchmesser Standfläche max.: | 108 Zentimeter |
| Durchmesser Stativbeine: | 22 Millimeter |
| Dämpfung verbaut: | Yes |
| Gewicht Stativ: | 1530 Gramm |
| Main material: | aluminium |
| Material Stativbeine: | Aluminium |
| Material Verschlussklemmen: | Aluminium |
| Max. Traglast Stativ: | 6 Kilogramm |
| Max. working height: | 256 Zentimeter |
| Min. working height: | 102 Zentimeter |
| Minimales Packmaß: | 98 Zentimeter |
| Mögliche Anschlüsse: | Schlitten je mit 2x 3/8 Zoll Gewinde und 2x 1/4 Zoll Gewinde - Stativanschluss 1x 3/8 |
| Product type: | Studiostativ |
| Transporttasche Stativ enthalten: | Yes |
Data according to manufacturer. Subject to alterations. Errors expected.