Skip to main content Skip to search Skip to main navigation

Walimex pro LED 500 area light (incl. 4 m mains cable, diffuser plate and warm tone filter), 16733

Product information "Walimex pro LED 500 area light (incl. 4 m mains cable, diffuser plate and warm tone filter), 16733"

Light-emitting diodes (LEDs) are characterised by their long service life, stable colour temperature and constant luminosity.
The 500 diodes achieve a huge light output, but still reduce heat development to a minimum.
The floodlight is particularly helpful when larger areas need to be illuminated, such as rooms, pieces of furniture, etc., because a lot of power is required here.


With a colour temperature of 5600 Kelvin, it is also ideal for video and film recordings. The brightness can be switched on or off in 4 equal sections using toggle switches.
The high operating frequency produces a homogeneous and soft continuous light without any ‘flickering’. The flaps ensure rectangular illumination and shadow-free light distribution. The extremely sturdy and durable aluminium casing makes the lamp very light and easy to transport.


 


Note:
Our products are specially designed for photographic and video requirements for image recording and are not suitable for household lighting purposes.

Safety Instructions

General Notes:

  • Feature Download the full version of the manual before setting up and using the device.
  • Feature Read the full version of the manual carefully before using the device for the first time. It contains everything you need to know to avoid personal injury and damage to property.
  • Feature Carefully observe all detailed safety instructions in the complete operating instructions.
  • Feature Disposal note: Please dispose of the packaging and the device at the end of its service life in accordance with the laws in force in your country.
  • Feature Danger of suffocation caused by small parts: Keep the device out of the reach of children and pets.
    Danger of blinding and eye damage
  • Feature The optical radiation of the LED lamp can blind the eyes and cause after-vision, if humans or animals look directly into the light. This can lead to accidents and eye damage.
    Danger of toppling, entrapment, burning and fire
  • Feature Make sure that the device is always positioned tilt and skid resistant and stored securely.
  • Feature Make sure that all fastening screws have been properly tightened.
  • Feature Keep out of reach of children and animals. They could topple the device.
    Danger of electric shock, fire through short-circuit
    A short-circuit could be caused by broken cables and through humidity or moisture.
  • Feature Please only use the original cables, which are included in delivery.
  • Feature Operate the device only in dry rooms. Do not operate the device outdoors.
  • Feature Have a dropped device checked by a qualified electrician before switching it on again.
  • Feature If your device should be damaged or broken or if you notice a burning smell:
    o Disconnect the power supply immediately by pulling out the power cord. Do not operate the device anymore.
    o Do not open the device.
    o Never repair the device on your own. Only a qualified electrician should only repair the device.
    Risk of electric shock, risk of burns
  • Feature Note that the device is still connected to the mains even when it is switched off. Only when you disconnect the device from the power supply by pulling out the mains plug, it is really free of voltage.
  • Feature Before carrying out any assembly or maintenance work, switch off the device and disconnect the power supply by pulling out the mains plug.
    Danger of burns on hot parts of the device
  • Feature The illuminants can reach temperatures of up to 70° C.
  • Feature The housing can reach temperatures of up to 55° C.
    Precautions when using with rechargeable battery
    Is the device operated with one or more rechargeable batteries (depending on the model):
  • Feature Protect the device, batteries and rechargeable batteries from fire and direct heat.
  • Feature Do not recharge a rechargeable battery unattended.
  • Feature Once the recharging process is finished, disconnect the charger from the power supply.
Manufacturer
  • manufacture location Walser GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@fotowalser.com
Properties "Walimex pro LED 500 area light (incl. 4 m mains cable, diffuser plate and warm tone filter), 16733"
Abschirmklappen Farbe: Aussen schwarz, Innen schwarz
Abstrahlwinkel: 60° ohne Diffusorscheibe
Anschluss Halterung: 16mm Zapfen (5/8 Zoll Spigot), Kugelkopf, verstellbar
Anzahl LED: 500
Anzahl Leuchtmittel Weißlicht: 500
Battery included: No
Battery required: No
Bi Color Funktion: No
Colour: black
Dimensions: 90 x 350 x 190 mm
Displaytyp: Nein
Farbtemperatur (in Kelvin): 5600 ± 300
Farbtemperatur regelbar: No
Farbwiedergabeindex (CRI) in Ra: ≥90
Gerät dimmbar: Yes
Illuminant type: Profi-Foto-Video LED
Klappen im Lieferumfang enthalten: Yes
LED power: 30 Watt
Leuchtstärke Tageslicht 1 m: 3700 Lux
Main material: aluminium
Material Gehäuse: Metall
Product type: Studioleuchte
Spannungsversorgung: Netzteil
Stromanschluss Wand: Stecker-Typ C (CEE 7/17)
Stromanschluss am Gerät: IEC-60320 C13
Transporttasche Leuchte enthalten: Nein
Data according to manufacturer. Subject to alterations. Errors expected.