Walimex pro FT-665T pro tripod, 185cm

Professional stability at a low price
This tripod from walimex pro impresses with its outstanding stability and versatility at a very attractive price.
With only 3 leg segments and leg diameters of 32, 28 and 24mm,
it provides excellent conditions for extreme stability.
The walimex pro FT-665T Pro photo tripod is ideal for both studio and outdoor use - even with heavy equipment.

Generous dimensions for maximum load reserves
The walimex pro FT-665T Pro tripod is made from a sturdy and very stable aluminium alloy and, thanks to its well-thought-out design, can withstand even hard continuous use . The very generously designed components of the walimex pro FT-665T Pro
photo tripod result in a maximum load capacity of 12kg, although this value
is very conservative and the tripod could certainly handle more load capacity.
This provides an extremely secure stand and reserves for heavy equipment as well.
The metal quick-release clamps (metal clamping rings, plastic clamping buckles) are very solidly manufactured and
can be individually fine-adjusted at any time using the supplied Allen key. With its maximum extension height of 185cm without a tripod head,
this tripod also offers a great deal of reserves for shooting from a greater height. Even
when the centre column is fully retracted, this tripod reaches a working height
of 160cm.

All standard tripod heads can be attached to the centre column (1/4 inch connection as standard, 3/8 connection using a suitable
thread adapter). With a tripod head, a maximum working height of approx. 195cm can be achieved. A tripod head can be attached very securely and twist-proof to the mounting plate using the 3 grub screws. The centre column with twist protection is reversible and the leg segments can be adjusted very close to the ground. This means that this tripod is also very good for taking close-up (macro) shots.

Comfortable and well-thought-out features
With the convenient quick-release clamps, you can precisely align the tripod
in seconds. Easy-to-extend tripod legs and a
bubble level plus compass in the tripod star additionally support you in
setting up this tripod. The foam rubber coating on all three leg segments always ensures a secure hold and a pleasant feel, even in adverse weather conditions. A generously sized, padded transport bag is already included in the scope of delivery. This bag is 16cm longer than the tripod and thus offers you the possibility of also leaving more voluminous tripod heads or panheads mounted on the tripod during transport.

• 
  
• outdoor and studio use, even with heavy equipment
  < li>Nature, animal and landscape photography
  
• Architectural photography
• Time-lapse and hyperlapse photography
  

• 
  
• Tripod leg diameter 32, 28, 24mm
  
• Max. load capacity conservatively calculated at 12kg
  
• Max. working height without tripod head 185cm
  
• Incl. bubble level and compass on the tripod star
  
• Foam rubber covers on all 3 tripod legs
  
• Clamp quick-release fasteners made of metal
  
• Reversible centre column and macro function
  

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions and property.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. The specified maximum load capacity is not applicable when the centre column is fully extended. When the centre column is fully extended this results in a reduced maximum load capacity and the tripod may not be as stable.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
  
• Moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• Tripod weight bags should only be used to secure your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  Please Follow the Following Safety Information When Using a Ball Head or Pan Tilt Head:
  
• When your camera equipment is screwed on, hold your device with one hand whilst unlocking the ball head or pan tilt head to prevent any possible damage to your camera equipment.
  
• Make sure that the quick-release plate is inserted correctly and not tilted. The locking knob needs to be in the furthest locking position to prevent your camera equipment from falling down.
  Using a Crank (Depends on Model)
  
• When using a crank, the locking screw on the centre column must always be loosened before adjusting the height of the centre column, otherwise you could damage the delicate pitch thread.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com