Walimex pro Boom Wheeled Stand and Counterweight Black, Height Adjustable Tripod 140-450 cm, Camera Tripod with 290 cm Rotatable Extension Arm, Perfect for Heavy Photography Equipment
Item no.: 1019630
GTIN/EAN: 4250234596305
€384.43
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Boom stand with 290 cm extension arm
• Adjustable height from 140 cm - 450 cm
• Maximum load capacity 10 kg
• Easy to manoeuvre castors with brakes
• Foldable and compact design
Product information "Walimex pro Boom Wheeled Stand and Counterweight Black, Height Adjustable Tripod 140-450 cm, Camera Tripod with 290 cm Rotatable Extension Arm, Perfect for Heavy Photography Equipment"
Professional Boom Stand for Photo Studios and Film Sets
Lightweight and Easy to Carry
The Walimex pro Wheeled Boom Stand has castors, and you can adjust the height of the boom arm from 140 cm - 450 cm. It includes two sandbags, and each sandbag weighs 4 kg, which will ensure an even weight distribution. You can also screw on additional counterweights if needed. The boom stand weighs 23 kg and this includes the castors and 8 kg counterweight. It has a compact design, which makes it easy to fold and store away.
High Load Capacity
The 290 cm long boom has three legs with a diameter of 35 mm, and it has a high load capacity of 10 kg. The adapters enable you to attach a wide range of photography equipment.
Supports a Wide Range of Photography Equipment
You can easily attach and remove the adapter which has a 5/8′′ spigot and a 1/4′′ and 3/8′′ thread. This enables you to attach a wide range of photography equipment and accessories, including LED lights, softboxes or cameras.
Robust Wheeled Boom Stand
The wheeled boom stand has a 94 cm base and three solid rubber castors with a diameter of 80 mm. You can use the brakes to lock the boom stand into position. The tripod stand can support up to 25 kg.
Securing Your Boom Stand:
When using very heavy equipment, you must attach additional weights or sandbags onto the stand’s legs. This will help to prevent it from tipping over. We recommend using the Walimex Weight for Poles & Boom Stands 4.4 kg / Walimex Tripod Weight, 3kg / Walimex pro Sandbag.
Product Information:
- Professional wheeled boom stand and can be used for low level lighting and can be adjusted up to approximately 450 cm
- 360° rotatable and tiltable up to 180°
- Tripod stand load capacity 25 kg and 290 cm boom with 10 kg load capacity
- Robust design with brackets and fasteners
- Foldable legs and when folded the boom stand is 120 cm
- 380 mm and 15 cm high castors with brakes and 12 mm thread
- Practical 5/8′′ (16 mm) spigot adapter and a 3/8′′ and 1/4′′ thread
- 2 counterweight sandbags each with a load capacity of 4 kg
Perfect for a Wide Range of Applications:
- You can attach spotlights, flash heads, studio lighting, LED lights, softboxes, reflectors and photography backgrounds
- Light effects and backlighting for product shots and portraits
- Can be used indoors and outdoors
What’s Included:
- x1 Walimex pro Wheeled Boom Stand 140 - 200 cm
- x1 boom extension arm 290 cm
- x1 adapter
- x2 counterweight sandbags and each with a load capacity of 4 kg
- x3 castors 80 mm with brakes
- x3 cable clips (already attached to the boom stand)
Safety Instructions
Download the full set of the instructions before setting up and using your device.
- Carefully read through the full set of instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
Risk of Injury Due to Improper Use
- Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
- Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
- Please follow the safety information in the manual regarding the maximum load capacity for your tripod.
- Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
- Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
- After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
- When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
- Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
- When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using a tripod at different heights. They offer added stability for your tripod.
- Using tripod castors:
Always lock the castors into place when you are not moving your tripod.
Manufacturer
Walser GmbH - Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@fotowalser.com
Properties "Walimex pro Boom Wheeled Stand and Counterweight Black, Height Adjustable Tripod 140-450 cm, Camera Tripod with 290 cm Rotatable Extension Arm, Perfect for Heavy Photography Equipment"
| Air cushioned: | No |
|---|---|
| Battery included: | No |
| Battery required: | No |
| Colour: | black |
| Diameter 1. Tripod segment (from below): | 35 Millimeter |
| Diameter 2. Tripod segment (from below): | 30 Millimeter |
| Dimensions: | 999 x 999 x 999 mm |
| Extendable: | Yes |
| Folded size: | 120 Zentimeter |
| Kompatible Geräte: | Walimex pro Studioblitze, Walimex pro LED-Dauerlichter, Walimex Pro Reflektoren |
| Locking clips material: | aluminium |
| Main material: | rubber, metal |
| Max. capacity (t): | 25 Kilogramm |
| Max. capacity (t): | 10 Kilogramm |
| Max. diameter of stand: | 94 Zentimeter |
| Max. working height: | 450 Zentimeter |
| Min. working height: | 140 Zentimeter |
| Number of tripod sections: | 2 |
| Possible connections: | 1/4" thread connection, 3/8" thread, 5/8" spigot (16mm) |
| Product type: | tripod |
| Tripod bag included: | No |
| Tripod weight: | 6600 Gramm |
Data according to manufacturer. Subject to alterations. Errors expected.
Skip product gallery 
Zubehör
Walimex weight for rods & boom stands, 4.4kg
• also suitable for rods with a diameter of 3.5 cm
• weighs approx. 4.4kg Subscription
Item no.: 1013739
• suitable as a counterweight for boom stands (e.g. WT-501) or as a weight for lamp tripods• also suitable for rods with a diameter of 3.5 cm
• weighs approx. 4.4kg
€37.37 *
Walimex pro Boom Stand with Castors 130 - 390 cm, Tripod with 3 - 6 kg Load Capacity, Light Stand with 4.4 kg Counterweight & Extension Arm, Swivel Head & Weight Bag
• Height adjustable from 130 - 390 cm
• Includes 4.4 kg counterweight
• Perfect for lighting & camera accessories
• Easy to manoeuvre castors with brakes Subscription
Item no.: 1017036
• 360° rotatable boom stand • Height adjustable from 130 - 390 cm
• Includes 4.4 kg counterweight
• Perfect for lighting & camera accessories
• Easy to manoeuvre castors with brakes
€192.42 *
Walimex pro sandbag
• for filling with sand, gravel, etc.
• Various applications in the studio or outdoors
• practical addition for tripods and boom stands, for example
• for a secure and stable hold Subscription
Item no.: 1015537
• flexible weight division according to your needs• for filling with sand, gravel, etc.
• Various applications in the studio or outdoors
• practical addition for tripods and boom stands, for example
• for a secure and stable hold
€14.49 *
Skip product gallery
könnte Sie auch interessieren
Walimex pro LED Sirius 160 Bi-Colour Panel Light Set with Light Stand, 65 W Adjustable Brightness 3200-5600 K, Lighting Stand 90-260 cm with Spring Cushioning
• Bi-colour LED light with 160 LEDs
• Adjustable brightness 3200-5600 K
• 120° beam angle + diffuser disc
• Light stand with spring cushioning 90-260 cm Subscription
Item no.: 1021041
• Powerful 65 W LED panel light set • Bi-colour LED light with 160 LEDs
• Adjustable brightness 3200-5600 K
• 120° beam angle + diffuser disc
• Light stand with spring cushioning 90-260 cm
€110.69 *