Walimex pro boom/roll stand 130-390cm 3-6 kg

Versatile, high-quality boom arm rolling tripod for demanding requirements.

This Walimex pro boom arm rolling tripod can be used for many professional applications in the film and photo sector and is an indispensable tool in many ways. From top to bottom, this <501> article <501> shines through quality and professionalism. The
3 tripod legs with a base diameter of 94 cm have 3 high-quality solid rubber
castors (80 mm) with brakes. This allows the boom to be quickly and easily protected against unintentional rolling away
or repositioned in seconds. The height of this boom stand can be adjusted from
130 cm to approx. 390 cm. The telescopic boom arm can be extended in
length from 115 to 215 cm or simply retracted into the centre column of
the stand. This boom stand can also be used as a conventional
light stand. If the stand is not needed, it can be folded up to a very compact size thanks to the foldable tripod legs.

Boom arm with extremely solid metal bracket
The boom arm is attached to an extremely solid metal bracket that allows you to adjust the inclination and rotation in a smooth and flexible way
.
Thanks to the generously dimensioned locking levers and fasteners,
this rolling wheeled stand can be swivelled 360° and adjusted in height by 180°.
A mounting adapter with a 5/8 inch spigot (16 mm pin) with 3/8 and 1/4 inch
threaded connections is available for convenient and practical mounting of your equipment. The mounting adapter is removable and can be attached
to the front as well as on the right or left side. This allows you to
mount and align your equipment such as flash heads, studio and system
flashes, LED lights, daylights, softboxes, reflectors, backgrounds and much
more in no time at all. Depending on the
extended length of the boom, the boom stand can support a load of 6 to 3 kg.
Of course, you can also use this stand as a conventional lamp stand. When used
as such, the stand can support a load of up to 8 kg and offers a
height adjustment range of 130 to 390 cm. The bag included as standard can be attached to the end of the telescopic arm with a counterweight or a separately available counterweight can be screwed on.

• 
  
• Versatile, very solidly constructed rolling boom stand, can be used from ground level to approx. 380 cm
  
• 360° rotatable and 180° height-adjustable
  <
• Tripod consisting of 2 tripod sections and 2 telescopic arm sections
  
• Very strong holders and fasteners
  
• Boom can support loads from 6 to 3 kg (depending on the boom extension length)
  
• Can support loads of up to 8 kg as a lamp tripod, height-adjustable from 130 to 390 cm
  
• Thanks to the foldable tripod legs, it has an extremely compact pack size
  
• 3 tripod wheels 80 mm, 15 cm high, with brake and 12 mm thread
  
• Practical and highly variable fastening adapter with 5/8 inch spig
  (16 mm spigot) and 3/8 and 1/4 inch connection
  

• 
  
• Flash heads, studio and system flashes, LED lights, daylights, softboxes, reflectors, backgrounds and much more
  
• Hair, effect and back light for product shots and portraits
  
• Use in studio or on the go
  

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Please follow the safety information in the manual regarding the maximum load capacity for your tripod.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
  
• Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
• Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
  
• When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using a tripod at different heights. They offer added stability for your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com