Skip to main content

Walimex pro 500/6.3 DSLR Mirror Canon EF

Product information "Walimex pro 500/6.3 DSLR Mirror Canon EF"

Normally, a long focal length of 500mm can also be accommodated in a length of 500mm (see our 500mm lens objectives).

To achieve a compact solution that is both universally applicable and compact, a trick was used for this objective. The beam path is simply ‘folded’ using two high-precision polished ring mirrors.

This results in a very compact design and an aperture that is over 50% larger than a lens objective with the same focal length, as well as a very short closest focusing distance of just 2 metres. The lens is focused manually. It can be used with either aperture priority or shutter priority (depending on the camera). It is not technically possible to insert an iris diaphragm into the folded beam path. If light reduction is necessary, this is easily achieved by using neutral density filters (not included), which are screwed in front of the rear lens. For this purpose, there is an M34x0.5 thread.

Practical: the lens has no fixed infinity stop. Focusing is carried out in a ‘pendulum’ fashion, whereby the point of focus is reliably found from out of focus to in focus to out of focus.


T2 connection, user tip: The T2 adapter is screwed onto the optics, then the lens is locked. After loosening the small screws on the side of the T2 adapter, the lens can be ‘raised’ – the index can be aligned upwards. Retightening the screws reliably secures the lens and adapter.

Advantages of a full-frame lens on a camera with an APS-C sensor

Save time in post-processing. A number of lens defects such as distortion, edge blurring or vignetting occur at the outer edges of the image.
If you use a lens designed for a full-frame format on a camera with an APS-C sensor, these areas are not used. This gives you maximum quality.
Additional post-processing time to correct lens defects is no longer necessary.


Manufacturer
  • manufacture location Walser GmbH
  • Wilhelm-Lexis-Str. 8
  • 52249 Eschweiler
  • DE
  • email service@fotowalser.com
Properties "Walimex pro 500/6.3 DSLR Mirror Canon EF"
Battery included: No
Battery required: No
Bildwinkel an APS-C:
Brennweite in mm: 500 mm
Colour: black
Cropfaktor: 1.5, Bei Einsatz an APS-C
Dimensions: 107 x 100 x 100 mm
Durchmesser Filter: 34 Millimeter
Durchmesser Objektiv: 95 Millimeter
Entwickelt für: Vollformat
Fokussierungsart: MF - Manueller Fokus
Geeignet für Sensor: APS-C, MFT, Vollformat
Innenfokussierung: No
Kameraanschluss / Mount: Canon EF
Kompatible Kameramodelle: Canon EOS-1D Mark II N, Canon EOS-1D X, Canon EOS-1D X Mark II, Canon EOS 1D Mark III, Canon EOS 1D Mark IV, Canon EOS 1Ds Mark III, Canon EOS 1Dx Mark II, Canon EOS 1Dx Mark III, Canon EOS 5D, Canon EOS 5D Mark II, Canon EOS 5D Mark III, Canon EOS 5D Mark IV, Canon EOS 5DS, Canon EOS 5DS R, Canon EOS 6D Mark II, Canon EOS 7D, Canon EOS 7D Mark II, Canon EOS 30D, Canon EOS 40D, Canon EOS 50D, Canon EOS 60D, Canon EOS 70D, Canon EOS 77D, Canon EOS 80D, Canon EOS 90D, Canon EOS 100D, Canon EOS 200D, Canon EOS 250D, Canon EOS 350D, Canon EOS 400D, Canon EOS 450D, Canon EOS 500D, Canon EOS 550D, Canon EOS 600D, Canon EOS 650D, Canon EOS 700D, Canon EOS 750D, Canon EOS 760D, Canon EOS 800D, Canon EOS 850D, Canon EOS 1000D, Canon EOS 1100D, Canon EOS 1200D, Canon EOS 1300D, Canon EOS C100, Canon EOS C100 MK II, Canon EOS C200, Canon EOS C300, Canon EOS C300 MK II, Canon EOS C700, Canon ME20F-SH, Canon ME200S-SH, Caonon EOS 6D
Lichtstärke Objektiv: 1:6,3
Linsen / Gruppen: 7/6
Main material: metal
Naheinstellgrenze: 2m
Objektiv Bauart: Teleobjektiv
Objektiv Kategorie: Teleobjektiv
Product type: Fotoobjektiv
Verwendung: Foto
Data according to manufacturer. Subject to alterations. Errors expected.