Walimex pro 4in1 Reflector Umbrella Set 150x200cm 5pcs

The reflector panel makes lighting fun! It is ideal for both beauty and product photography – in the studio and for outdoor photography. The reflector panel softens and reduces the light, so that the light/shadow contrast can be adjusted optimally. This also applies to extreme lighting conditions, when the sun is high in the sky and the contrasts are strongest. In the studio, the reflector sail is the perfect assistant for brightening distracting shadows or achieving certain lighting effects. The reflector sail ensures an even base light and, as a result, control over the lighting situation and beautiful images.

The extensive set consists of a very sturdy, collapsible reflector that can be easily covered with the appropriate cover. You can choose between white (neutral), silver (cold) and gold (warm) reflective surfaces. In addition, a black surface is used for shading.

The lightweight and extremely sturdy aluminium reflector frame can be folded up in no time at all When stowed in the included transport bag, it fits comfortably in the boot of your car.

Note: Please note that your reflector sail must always be secured against the wind when used outdoors.

The walimex pro AIR lamp tripod is a high-quality solution for studio photographers. The excellently processed tripod can be used portably and flexibly with a net weight of approx. 2.1 kg and a transport size of approx. 103 cm. You can use studio flashguns or reflectors up to a weight of 7kg on this tripod. The pneumatic damping is the special feature of this tripod, as it ensures the necessary safety when lowering the individual tripod elements. The most outstanding feature, in the truest sense of the word, is the 5/8 spigot with 1/4 and 3/8 inch threaded connection. This can be inserted at the top or side of the head of the tripod, so that it is also possible to use telescopic extension arms, for example, and you are even more flexible in the studio.

Extra highlight: the spigot can be mounted sideways into the spigot receiver. This is particularly useful for repro shots.

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Please follow the safety information in the manual regarding the maximum load capacity for your tripod.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
  
• Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
• Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
  
• When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using a tripod at different heights. They offer added stability for your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com