Walimex modelling lamp for RD-600/GXB-400/600, 20W

Note:
Our products have been specifically designed for photographic and video recording purposes and are not suitable for household lighting purposes.

Important Information

• Only use the right studio lighting with the correct studio flash kit.
  
• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through all the safety information detailed in the set of instructions. This safety information only refers to this product and any applicable camera accessories.
  
• Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
  Risk of personal injury, if your studio lighting or flash tube is damaged or cracked.
  Even a small amount of skin grease residue on the flash tube can cause it to burst due to the heat that is generated when it is on. Glass splinters can cause injuries to your eyes and skin.
  
• Be careful when using a flash tube and ensure that the glass does not break.
  
• When setting up your studio light, make sure that you do not touch the flash tube with your bare hands.
  
  Fire Hazard
  The studio lighting can get as hot as 240 °C. Highly flammable materials may start to burn if they get too close to a hot part of the device. Some parts of the device can become very hot.
  
• Do not touch these parts of the device when it is in use or cooling down.
  
• Allow the light to cool down for approx. 30 minutes before trying to replace a bulb or tube.
  
  Risk of Electric Shock
  When the device is switched off, it is still connected to the mains. By unplugging the device, you can disconnect it from the main power supply.
  
• Make sure to switch off the device before carrying out any maintenance or repair work and disconnect it from the power supply by pulling out the plug.
  
• Discharge the appliance before carrying out any maintenance work

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com