Walimex ceiling rail system 4x3m, with 3 scissors

The walimex Ceiling Rail System makes your work in the studio much easier. Tripods and cables, which used to be a tripping hazard, are now a thing of the past. The scissors allow a stepless extension up to max. 200cm, so that smaller objects standing on the floor can also be photographed without any problems . The 5/8 inch spigots are suitable for all standard studio lights and studio flashes. The smooth-running guide carriages allow you to easily slide the scissors back and forth and thus effortlessly bring them into the position you want. The scissor springs are made of stainless steel.

Please note that the ceiling to which you are attaching the system must be of high stability.

Important Information

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the full set of instructions before using this product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries, damage to your possessions, property, and the environment.
  
• Carefully read through all the safety information detailed in the set of instructions.
  
• The studio lighting ceiling track may only be used and installed by qualified members of staff. Make sure to also check beforehand the ceiling load-bearing capacity of where it is going to be installed.
  
• Choking Hazard: Please keep all small parts, camera equipment, and any packaging out of reach from children and pets.
  Danger of falling parts and risk of personal injury.
  The lighting ceiling track weighs approx. 24.5 kg. The maximum load capacity of 6 kg must not be exceeded. Check your ceiling’s load capacity. Caution: Please also check the instructions for the weight of the lighting ceiling track.
  
• Only attach the ceiling lighting track to ceilings that are stable enough to bear the entire load.
  
• Please only use suitable fixing material for ceiling mounting.
  
• Attach the ceiling track securely and firmly. Tighten all screws on the ceiling track and the fastening screws on the rails after it has been used a couple of times.
  
• When attaching it to the ceiling, be careful of any power cables or water pipes underneath in order to prevent an electric shock.
  Risk of personal injury and fire due to falling parts or appliances.
  
• Ensure that the ceiling track is always firmly and securely attached to the ceiling
  
• Ensure that the equipment used is securely fastened and that the safety rope is attached.
  
• The cables can be a trip hazard, therefore, make sure that are clearly visible to avoid accidents. Be careful that no appliances fall down.
  
• Do not squash any power cables or mains cables when using a scissor lift trolley, as this can cause an electric shock.
  
• Only use spare parts for this device that comply with the specifications of the product.
  
• Keep any easily flammable materials away from the device.
  
• Avoid contact with loose parts, items of clothing, or your hair when using a scissor lift trolley.
  
• When using the scissor lift trolley, be careful not to place your fingers in it, as this may cause hand and finger injuries.
  
• Do not put your hand or arm between the rails when installing, cleaning, using, or repositioning your appliances or scissor arms, as this can cause injuries.
  Risk of Burns
  The light sources on the studio devices can reach high temperatures as specified by the manufacturer. Note: Check the manual to find out how long the studio equipment needs to cool down.
  
• Do not touch these parts of the device when it is in use or cooling down.
  
• Allow the device to cool down completely before carrying out any repair work.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com