Walimex Boom Stand Deluxe 100-460cm 4-6kg

Top quality and stability even for heavy equipment

With this boom stand or boom stand including telescopic boom arm
from walimex, you get a
professional and very convenient boom stand with a simple and
extremely convenient handling. It also offers
excellent stability when mounting medium-heavy equipment. The
maximum load of 6 to 4 kg (depending on the extension length) is achieved by the
voluminous telescopic tripod segments with diameters of 35 and 32 mm.
Two telescopic segments, one of which can be extended, ensure optimal stability and quick handling of the boom. This boom can be extended to a length of 120 to 220 cm. The telescopic boom has a variable fastening system.



The extremely convenient attachment of your equipment to the telescopic boom of this boom stand offers you an enormous increase in comfort. The professional
fastening adapter can be simply removed from the mount and you can attach your equipment here using a 5/8 inch spigot (16 mm pin) or a 1/4 and 3/8 thread.

Spring-loaded boom stand with variable angle adjustment and an extends
from 100 to 460 cm.
This boom stand can be adjusted in height from 100
to approx. 460 cm. Thanks to the variable angle adjustment of the telescopic arm,
you can move your equipment in a matter of seconds, both close to the ground and
above the heads of your models. The boom is attached to the supplied lamp tripod using a very robust and practical clamp. The metal bracket is extremely solid and has two practical and generously designed fastening levers. The holder allows the
boom to be connected to tripod tubes with a diameter of 22 to 35 mm. This means that
the boom can be attached to any centre column element of the included tripod. The tripod tubes are reliably protected from scratches by the integrated
plastic inserts. The mount allows the
boom to be adjusted 360 degrees – a simple yet very
practical solution. The spring damping of the centre column elements of the stand ensures comfortable handling and the safety of your mounted equipment. This way, your photo and video equipment, such as (studio) flashguns, (LED) lights, softboxes, reflectors and much more, is held very securely and the light can be precisely aligned. With
this boom, almost all lighting effects can be realised in a flash, regardless of
whether you want to use it close to the ground or direct light from above for hair and effect lighting
.

Clever and practical counterweight bag
The counterweight bag, which can be hung from the carabiner hook
of the telescopic boom, allows you to always keep your boom in the right balance and
adjust the counterweight to the installed equipment. The special feature of this
counterweight solution is the type of weighting: instead of sand or a simple weight, up to six 1-litre
drink bottles are used. These 1-litre bottles are normally filled with water,
thereby offering a choice of counterweights from a good 1 kg to over 6 kg. For
the heaviest loads, you can of course create an even heavier counterweight by filling
the bottles with sand. This very clean and
variable solution makes perfectly balancing the boom arm a breeze.

• 
  
• Boom stand for connecting photo and video equipment
  
• Working height from ground level to a dizzying 46 0 cm thanks to variable
  angle adjustment of the telescopic arm
  
• Boom stand with a max. height of 100 cm (horizontal telescopic arm) to
  approx. 460 cm (stand and telescopic arm extended)
  
• Stand extendable from 100 to 256 cm, telescopic arm extendable can be extended from 120 to 220 cm
  
• High load capacity of the entire system from 6 kg to 4 kg thanks to the large
  tube diameter of the stand and the telescopic arm
  
• Telescopic rod can also be used as a pole for assistants
  
• Secure stand for the stand thanks to the large base of 9 4 cm
  
• Very solid metal boom mounts, adjustable through 360 degrees
  
• Variable and extremely convenient adapter system, mounting adapter
  can be removed and used at the front as well as on the right and left
  
• Intelligent and very user-friendly counterweight system
  

• 
  
• Studio and system flashes
  
• LED lights
  
• Reflectors, softboxes, umbrellas, backgrounds and much more.
  
• Hair, effect and backlighting, ideal for directional light from above
  

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions.
  Risk of Injury When Loosening Pretensioned Parts!
  The springs on centre column are pretensioned when they are delivered. WARNING! When opening the tripod locks, make sure to keep enough distance from the top end of the tripod and do not lean over the tripod.
  
• So that the tripod can be packaged and delivered, the fitted spring damps are pushed slightly together and then locked into place. When opening the locking clamps, the centre column parts can spring out up to 20 cm. This may cause injuries.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Please follow the safety information in the manual regarding the maximum load capacity for your tripod.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. Depending on the equipment used, the maximum load capacity may differ from the specified maximum load. When using a boom, it is recommended to use suitable counterweights.
  
• Please note that moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• After using your tripod for a long period of time, you may have to tighten the screws on the tripod clamps. Not enough tension reduces the maximum holding force of the tripod. Make sure that the clamps are tight, but do not tighten them too much. If the torque is too tight, the parts on the centre column may no longer be able to be extended properly.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
• Do not move a loaded tripod with an extended centre column. You should only move it very carefully by holding it and gently pushing it. When heavy camera equipment is fitted onto a tripod and the large centre column has been extended, this can quite often cause a very sudden leverage effect. The lamp tripod has a top-heavy design when camera equipment has been fitted onto the top, therefore, be careful that it does not tip over and damage any camera equipment or cause any injuries.
  
• When using heavy equipment, especially when the tripod has been fully extended, you may have to stabilise your tripod by adding weight to the legs. For this, we would recommend using special sandbags or tripod weights. These will ensure that your tripod is stable. You can also use safety ropes when using a tripod at different heights. They offer added stability for your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.

• Walser GmbH
• Wilhelm-Lexis-Str. 8
• 52249 Eschweiler
• DE
• service@fotowalser.com