Walimex 3-flex extension arm with 2 spigots, 80cm
€56.72
Immediately available, 2 - 3 days delivery time within Germany.
Delivery times for other countries see here.
• Super-practical, triple-flexible articulated arm with two spigots
• Ideal for use with e.g. mounting tables, autopoles, etc.
• Practical locking levers enable quick positioning and customised locking
• Stable ball joints prevent unintentional slipping of the set positions
• Total length approx. 80cm, max. load capacity: approx. 2kg, 5/8 spigots with 1/4 and 3/8 inch thread
Product information "Walimex 3-flex extension arm with 2 spigots, 80cm"
Versatile. Flexible. Practical. And much more! The 3-flex boom arm is characterised by its wide range of applications. The articulated arm is ideally suited for use in the studio. It can be attached to a shooting table or autoclamp, for example, and used to flexibly position lightweight studio accessories such as polystyrene forks, reflectors or small flash heads up to approx. 2kg. Thanks to the high-quality ball joints and locking levers, you can always control and hold your desired position.
The two 5/8 spigots on both ends of the arm are particularly practical. Each spigot has a 1/4 inch and a 3/8 inch connection, which couldn't be more flexible.
Walser GmbH - Wilhelm-Lexis-Str. 8
- 52249 Eschweiler
- DE
service@fotowalser.com
| Battery included: | No |
|---|---|
| Battery required: | No |
| Colour: | black, silver-coloured |
| Dimensions: | 800 x 50 x 35 mm |
| Extendable: | No |
| Load capacity: | 2 Kilogramm |
| Main material: | aluminium, plastic |
| Possible connections: | 5/8" spigots with 1/4" and 3/8" thread |
| Product type: | photography accessories |
Zubehör
Available
• 2 sliding carriages with 3/8 inch thread
• 2 outer, lateral mountings with 1x 1/4 inch thread each
• Ideal for stereo photography, repro work or macro
• Up to 4 devices can be mounted on the extension arm, 2x 3/8 inch, 2x 1/4 inch
Available
• Almost unlimited application possibilities
• Fits lamp stands, background frames, extension arms, edges, plates, etc.
• Clamping range from approx. 10-60mm
• Fitting for 5/8 inch spigot
Available
• clamping range approx. 1-3.5cm
• versatile application possibilities
• high load capacity
• with 5/8 spigot and 1/4 inch thread
Available
• with 1/4 inch and 3/8 inch thread
• ideal as a holder for reflectors, polystyrene holders, super clamps, etc.
• Lightweight (approx. 300g)
• Load capacity (retracted) approx. 10kg
Available
• Screwing device for attaching to rods and plates up to 3.5 cm
• Clamping device for clamping backgrounds, reflectors, polystyrene plates etc. with a clamping range of approx. 2.5cm
• Very stable and practical