Mantona DSLM Travel black travel tripod

Compact and lightweight aluminium travel tripod

The mantona DSLM Travel tripod is an extremely compact tripod that is ideal for travelling. With a weight of approx. 1300g, the aluminium tripod is light and can be easily transported in the supplied bag. The leg angles can be adjusted up to 180°, allowing you to fold it compactly to a length of 35 cm for transport and also making it very flexible to use. Even ground-level shots are no problem. Four leg segments with quick-release fasteners allow for easy height adjustment and quick assembly and disassembly. The tripod can be extended to a height of 143 cm.
The foam rubber coating on one of the tripod legs ensures a pleasant feel
and comfortable use even at low temperatures.

Ball head with two spirit levels

Particularly practical: the tripod can also be used as a monopod. The monopod can be extended by the centre column, which can be extended in two stages. The centre column has a weight hook on which you can hang weights to stabilise the tripod. The ball head features a convenient panorama scale, making it easy to switch to portrait format. The head has two convenient spirit levels for precise alignment – one for portrait and one for landscape format. Thanks to a tripod screw with a 3/8-inch and 1/4-inch thread, the camera can be mounted either on the head using a quick-release plate or directly on the tripod.

Ideal for DSLMs

With a maximum load capacity of approx. 5kg, the tripod is ideal for use with system cameras.

mantona Outdoor
Mantona tripods for use when travelling and outdoors. Compact and lightweight, combined with the highest material quality and functionality. Mantona draws on the experience of professional photographers, athletes and outdoor enthusiasts and combines it all in top-quality products. Depending on the application, mantona offers the right product for every requirement.

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions and property.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. The specified maximum load capacity is not applicable when the centre column is fully extended. When the centre column is fully extended this results in a reduced maximum load capacity and the tripod may not be as stable.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
  
• Moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• Tripod weight bags should only be used to secure your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  Please Follow the Following Safety Information When Using a Ball Head or Pan Tilt Head:
  
• When your camera equipment is screwed on, hold your device with one hand whilst unlocking the ball head or pan tilt head to prevent any possible damage to your camera equipment.
  
• Make sure that the quick-release plate is inserted correctly and not tilted. The locking knob needs to be in the furthest locking position to prevent your camera equipment from falling down.
  Using a Crank (Depends on Model)
  
• When using a crank, the locking screw on the centre column must always be loosened before adjusting the height of the centre column, otherwise you could damage the delicate pitch thread.