Mantona Dolomit 4000 170cm video tripod

Stability and steadiness combined with comfort and compactness: that is what our Dolomit video tripod series stands for! A clever panhead ensures smooth and precise movements, while sturdy legs ensure a firm stand. In short: the perfect foundation for your professional ideas!

The professional video tripod Dolomit 4000, which stands approx. 170cm tall, is suitable for heavy video cameras and DSLRs up to 14kg. This tripod's flexible settings for panning and tilting movements are particularly noteworthy. The long swivel arm supports you in flexibly controlling the camera. It is particularly practical that this arm can be mounted on both the right and left side of the tilt head, depending on whether you are right- or left-handed. Precise levelling is no problem thanks to the integrated and even illuminated spirit level.

The tripod made of a high-quality aluminium-magnesium alloy ensures the necessary stability. The quick-release fasteners are easy to use and allow for simple and quick height adjustment. Double-guided legs and a centre spreader further increase stability.

• Download the full set of the instructions before setting up and using your device.
  
• Carefully read through the instructions before using your product for the first time. The instructions include all the important information that you will need to know about the product in order to avoid injuries and damage to your possessions and property.
  Risk of Injury Due to Improper Use
  
• Be careful not to trap your fingers in the struts on the tripod legs when folding your tripod.
  
• Please note that lamp tripods must be set up on a sufficiently strong, level surface to ensure maximum stability and load-bearing capacity.
  
• Carefully read through all the information regarding the tripod’s maximum load capacity.
  
• Please note that the specified load capacity applies to any equipment that is placed in the middle of the tripod. The specified maximum load capacity is not applicable when the centre column is fully extended. When the centre column is fully extended this results in a reduced maximum load capacity and the tripod may not be as stable.
  
• When adjusting the centre column with mounted equipment, for your own safety and to protect the installed equipment, make sure that you hold the centre column with one hand while loosening the locks before loosening the tripod locks.
  
  
• Moisture can damage the parts on the middle column, and this may reduce the holding force and the parts on the centre column can start to slope downwards under heavy loads. Therefore, if necessary, dry the parts on the centre column with a soft, absorbent cloth (e.g. made of cotton).
  
• Tripod weight bags should only be used to secure your tripod.
  
• Using tripod castors:
  Always lock the castors into place when you are not moving your tripod.
  
  Please Follow the Following Safety Information When Using a Ball Head or Pan Tilt Head:
  
• When your camera equipment is screwed on, hold your device with one hand whilst unlocking the ball head or pan tilt head to prevent any possible damage to your camera equipment.
  
• Make sure that the quick-release plate is inserted correctly and not tilted. The locking knob needs to be in the furthest locking position to prevent your camera equipment from falling down.
  Using a Crank (Depends on Model)
  
• When using a crank, the locking screw on the centre column must always be loosened before adjusting the height of the centre column, otherwise you could damage the delicate pitch thread.